This exotic Dove white granite tiles and pavers is one of our most popular granite range. Stones can also warm up during a hot summer day therefore we recommend this lighter colour granite. Looks great on wet areas such as pool pavers, garden areas, patios, driveways, steppers, and other similar outdoor areas. Matching Pool Copings:Dove Granite Bullnose Pool Coping Tiles, Dove White Granite Drop Face Pool Coping
Dove White Granite Pavers with Sawn Edges are available in: 800x400mm and 500x500mm in 20mm Thick, (all stocked) other sizes available by request. Thickness and size variation is the industry standard of +-2mm.
Dove White Granite Pavers with Sawn Edges are available in: 800x400mm and 500x500mm in 30mm Thick, (all stocked) other sizes available by request.
Dove White Granite Pavers with Drop Face available in: 800x400mm and 500x500mm in 40/20mm Thick (other sizes available by request, or we can cut down existing sizes to suit).
Stocked in 800x400mm and 500x500mm. Available in any size from 400mm x 400mm up to 2000mm x 1000mm
We deliver Granite Pavers door to door to all suburbs in Melbourne, Sydney, Canberra, Brisbane, Adelaide and Hobart. We also deliver to any regional area in Australia at reasonable freight rates.
Granite is a perfect choice for…
For more information feel free to give us a call on 03 9706 9767 or Talk to one of our experts and get a FREE Quote.
Additional information
SIZES + PRICES:
500x500x20mm $89 m², 800x400x20mm $89 m²
INSTALLATION - SEALING - MAINTENANCE GUIDE
Installation Guidelines
We recommend that you grade the pavers into 2-3 thickness groups prior to installation. This is easily done as you are taking the tiles out of the crates and will also mix any variations in colour through the job from different crates.
15mm is recommended to be ONLY layed in a rapid setting adhesive and please use a 6mm trowel as follows…. Notch out 6mm of adhesive on the slab and 6mm cross notched on the back of each tile. Also please lay in BRICK or STRETCHER BOND patterns and allow for a 8mm minimum grout joint to allow for any tile variations in length or width. DO NOT ACID WASH your pavers.
Sealing
Bluestone tiles and pavers can be sealed as a peace of mind to ensure bluestone stays in pristine condition. It’s highly recommended particularly in areas where there may be high spillage to protect the lustre of the bluestone tiles and pavers.
If you choose not to seal your tiles, make sure you clean up spills immediately to avoid staining the tiles. Use only a penetrating invisible type sealer (no colour change) similar to Tasman Chemicals STONE SHIELD and ALWAYS follow the sealer manufacturers instructions when applying. We stock a FULL range of suitable sealers.
Cleaning
Do not use Hydrochloric acid for clean up as this can cause minerals present in the stone to react adversely.To clean prior to sealing simply pressure wash the stone and ensure nozzle is never closer than 300mm to the surface of the stone.
Maintenance
Just sweep when needed. Bluestone responds well to high pressure cleaning with a domestic machine, please keep the nozzle about 300mm minimum away from face of the bluestone pavers and tiles. A solution of mild detergent and water can be applied prior to pressure cleaning.
