Raven Grey Granite Pavers

Original price was: $100.00.Current price is: $89.00.

ORDER FREE SAMPLE | REQUEST A FREE QUOTE


✔ HIGH NON-SLIP RATING   ✔ 100% PURE STONE   ✔ POOL COPING


European Bluestone Midnight Granite Pearl Grey Limestone Harkaway Bluestone


Description

Raven Grey Granite Pavers with Sawn Edges are available in varieties of sizes. Granite pavers can be sealed with an invisible penetrating sealer to assist in the ongoing clean up of the stone. These tiles have had 3 coats of colour enhancing sealer from TASMAN to darken them. It is an additional purchase. Thickness and size variation is the industry standard of +-2mm.
Matching Pool Copings:  Raven Grey Granite Pavers with Bullnose Edges, Raven Grey Granite Pavers with Drop Face
other sizes available by request, or we can cut down existing sizes to suit
12mm :Thick tiles should be laid directly onto a concrete slab or great for balconies, decks or indoor floor tiles.
20mm :Thick pavers can be laid as above OR onto a compacted road base into a wet slurry of sand and cement
30mm :Thick pavers can be laid as both above or onto a compacted road base into a dry sand bed, great for tiling over easements or where you require water permeation.
We deliver Granite Pavers door to door to all suburbs in Melbourne, Sydney, Canberra, Brisbane, Adelaide and Hobart. We also deliver to any regional area in Australia at reasonable freight rates.
Granite is a perfect choice for…
driveway paving icon by stone pavers australia pool coping paving stone pavers melbourne fire place wall cladding by stone pavers australia stepping stone pavers icon by stone pavers

For more information feel free to give us a call on 03 9706 9767 or Talk to one of our experts and get a FREE Quote

Additional information

SIZES + PRICES:

500x500x20mm $89 m², 800x400x20mm $89 m²

INSTALLATION - SEALING - MAINTENANCE GUIDE

Installation Guidelines

We recommend that you grade the pavers into 2-3 thickness groups prior to installation. This is easily done as you are taking the tiles out of the crates and will also mix any variations in colour through the job from different crates.

15mm is recommended to be ONLY layed in a rapid setting adhesive and please use a 6mm trowel as follows…. Notch out 6mm of adhesive on the slab and 6mm cross notched on the back of each tile. Also please lay in BRICK or STRETCHER BOND patterns and allow for a 8mm minimum grout joint to allow for any tile variations in length or width. DO NOT ACID WASH your pavers. 

Sealing

Bluestone tiles and pavers can be sealed as a peace of mind to ensure bluestone stays in pristine condition. It’s highly recommended particularly in areas where there may be high spillage to protect the lustre of the bluestone tiles and pavers.

If you choose not to seal your tiles, make sure you clean up spills immediately to avoid staining the tiles. Use only a penetrating invisible type sealer (no colour change) similar to Tasman Chemicals STONE SHIELD and ALWAYS follow the sealer manufacturers instructions when applying. We stock a FULL range of suitable sealers.

Cleaning

Do not use Hydrochloric acid for clean up as this can cause minerals present in the stone to react adversely.To clean prior to sealing simply pressure wash the stone and ensure nozzle is never closer than 300mm to the surface of the stone.

Maintenance

Just sweep when needed. Bluestone responds well to high pressure cleaning with a domestic machine, please keep the nozzle about 300mm minimum away from face of the bluestone pavers and tiles. A solution of mild detergent and water can be applied prior to pressure cleaning.

You may also like…